Model Number: | MY1R-SRT3 |
MOQ: | 10 |
Payment Terms: | T/T |
Supply Ability: | 10Kpcs |
· QSFP56 Serial Optical Interface
· 4x50G PAM4 retimed 200GAUI-4 electrical interface
· MPO- 12 APC connector
· 4 channel VCSEL arrays and 4 channels PIN photo detector arrays
· Maximum link length of 70m on OM3 or 100m on OM4
· QSFP56 MSA Compliant
· Hot Pluggable QSFP56 form factor
· Compliant with CMIS 5.2 or SFF-8636
· Compliant with IEEE 802.3cm
· Low Power Consumption
· Less than 3.5W in temperature range of 0 to 70°C
· 200GBASE-SR4 200G Ethernet
· Data center
· Compliant with CMIS 5.2 or SFF-8636
· Compliant with IEEE 802.3cm
· QSFP56 MSA Compliant
Part Number | Product Description |
MY1R-SRT3 | QSFP56, 200Gbps, SR4, 100km, 0ºC ~ 70ºC, With DDM |
MY1R-SRT3 is a Four-Channel, Parallel, Pluggable, Fiber-Optic QSFP56 for 200Gigabit Ethernet applications. This transceiver is a high performance module for short-range data communication and interconnect application. It integrates four data lanes in each direction with 4x26.5625GBd. The length of QSFP56 SR4 is up to 70 meters over OM3 MMF or 100 meters over OM4 MMF. This module is designed to operate over multimode fiber systems using a nominal wavelength of 850nm.
Absolute Maximum Ratings
Parameter | Symbol | Min | Max | Unit |
Storage Temperature | Ts | -40 | 85 | °C |
Case Operating Temperature | Top | 0 | 70 | °C |
Relative Humidity (non-condensation) | RH | 85 | % | |
Supply Voltage | Vcc | -0.5 | 3.6 | V |
Receiver Damage Threshold, per Lane | PRdmg | 5 |
dB |
Parameter | Symbol | Min | Max | Unit |
Operating Case Temperature | Top | 0 | 70 | °C |
Relative Humidity(non-condensing) | RH | 5 | 85 | % |
Power Supply Voltage | Vcc | 3.135 | 3.465 | V |
Total Power Consumption | Pc | - | 3.5 | W |
Bit Rate | BR | 215 | Gbps | |
Fiber Length onOM3 MMF | 70 | m | ||
Fiber Length on OM4 MMF | 100 | m |